It is completely different to use a stand-up lift truck compared to a sit-down unit. The way you transport and pick up loads as well as your movements are really different. If you do not have proper training for utilizing a stand-up model, you can possibly cause harm to yourself or to co-workers. When utilizing a stand-up unit, you should follow the proper safety regulations. There are a few basic operating standards which have to be met when operating a stand-up unit.
To begin on a stand-up unit forklift, it is vital to get a good feel for the controls and the steering knob. As opposed to a steering wheel, the steering is handled with the knob steering plate. Remember that this particular knob moves very fast, therefore, you should be accustomed to moving it gently so as to be sure not to over steer. The horn is located on the control handle, as is the control for the fork movement and for forwards, backwards. The floor pedal enables the machine to move.
Turn the key to start the equipment's engine if you are ready to begin. The forks should not be extended at this stage. If you are moving around the floor, the forks must be pointed slightly upwards. Do not drive with the forks in their extended position. If you are moving forward, move the control handle forward and step on the pedal to make the lift move forward. If you are backing up, be sure to beep your horn so as to warn individuals around you. Look behind you before stepping on the pedal so as to make sure the path is safe and clear. Next, pull the control handle towards you while stepping on the pedal. Stay focused and alert and make sure that you are operating in a safe way at all times.
When approaching a corner with the lift truck, turn the steering knob towards the direction you are heading. Make sure to keep your hands on the control handle and keep your foot on the accelerator. When turning right, the steering knob will move in a clockwise direction while moving forward. If you are turning left, your steering knob would go in a counter-clockwise direction.
The stand-up models take some getting used to, specially if you have just utilized sit down units. If you take some time to know the machinery and with some training, you will be able to quickly and efficiently handle loads in little time.