In the majority of situations, most individuals spend quite a lot of money buying their lift truck. Therefore, it is very essential to take proper care of it so as to protect your investment well into the long run. It is really a good idea to know the procedures which are undertaken during taking care of and maintaining this machine.
By starting up the forklift and listening carefully how it works is one of the best ways to tell how good the engine is working. For example, if there are any misses or knocks, the machine is defective and this must raise some issues. Additionally listen closely for any squealing sounds which come from the belts because these noises will provide you with a lot of information.
When carrying out maintenance, several of the main parts you will have to pay attention to consist of the safety warning devices, horn, the overhead guard, the lights and the gauges. Any burnt out light bulbs or faulty parts must be replaced as soon as they are noticed. It is also imperative to check the wiring.
When the above parts have been inspected thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every battery cell should be inspected in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters have to be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
After the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make sure to apply some grease. Check the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Afterwards, inspect each and every other component of the machinery including the wheels. If any kind of fault or concern is detected, be sure to deal with it immediately in order to make sure the equipment is running at its safest and optimum levels.