Used Mitsubishi Warehouse Forklifts Surprise

Consider the Fast Charge Option
There is an old rule of thumb regarding recharging batteries of forklifts. It goes something like: use a battery for 8 hours, charge it for 8 hours and then finally, allow it to cool for 8 hours. This formula has changed for a lot of work operations which run more than one 8 hour shift. The fast charging option has become a very common alternative to traditional charging and ever since its development; many businesses have chosen to make the switch.

What Are the Advantages of Fast Charging?

Less Charging Time
It could take a typical charger to charge a battery from 20% charged to 100% charged in approximately 8 hours. Fast charging can now accomplish this same charging in about an hour to an hour and 30 minutes! Lots of companies utilize scheduled lunch and break times to accomplish this important task.

Easier Refills
Usually, fast charge batteries also need a single-point watering system. This system means that users do not need to remove the battery from the forklift in order to water it.

Temperature-Sensitive Design
There is a thermistor located next to the center cell on each new fast charge battery that helps it to monitor temperature. The charge rate is reduced and may occasionally stop when the temperatures get to a particular level. This is important so that the battery does not overheat. This method could unfortunately lead to an undercharged battery. There are several particular fast charge battery brands which use extra thick posts, copper inserts and inter-cell connectors in order to increase conductivity and reduce heat generation due to the higher current. These features help to allow the battery to accept a higher charge rate for a longer time period.

These machines have seen their overall productivity increase greatly since the fast charge battery system was created. In the past, companies used to require more than one machinery when they were operating around the clock; now they could save much money and utilize one forklift twice as much in a day with by utilizing the fast charging batteries.

• Used Komatsu Counterbalance Forklift Surprise
  Counterbalance lift truck Training The Occupational Safety and Health Administration does require drivers using a counterbalanced lift truck to have received classroom or lecture style training. They also require that a supervised driving course is... More
• Used Genie Aerial Work Platforms Surprise
  The Terex Global Supply Management Organization is a well-known, trusted corporation in the construction industry. Terex continually searches for suppliers that enable us to produce machines at the best cost and of the highest quality... More
• Used Jungheinrich Order Picker Forklifts Surprise
  For the use of lift trucks, there are several health and safety rules governing their utilization. Forklifts are large industrial machines that could be dangerous and need to be handled with safety in mind. The... More
• Used CAT 4 Wheel Drive Forklifts Surprise
  Rough terrain vehicles are utilized mainly to deal with stacks of wood, pallets of concrete blocks and other handling jobs on surfaces that are not paved. These machinery are engineered to work in extreme settings.... More
• Used Komatsu Lift Trucks Surprise
  Originally from Japan, Komatsu is a major construction corporation and heavy equipment manufacturer. They have been in business for more than 50 years and have built a solid reputation within the industry. Komatsu started doing... More